MOUNTAIN TAMERTM TRIPLE details 
 
 
Don't be limited by stock gearing
You can have LOWER GEARS 
Any way you want them for steep climbs

for high altitude

for easier climbing

for maximum efficiency

a necessity for loaded touring

great for hand cycles, trikes and recumbents
 
 

MOUNTAIN TAMERTM TRIPLE $44.95
Replaces standard small chainring

Allows from 17 thru 34 teeth in the triple position

Works with indexed front shifters including Rapid-Fire

Works with oversize 88mm bottom bracket shells

Quick and easy to install

Very easy to change sizes

Splined chainrings

Can be used as a quad if triple chainring is 26T or larger
 
 


      The new triple chainring is in the same position as the original.

 
     Mountain  Tamer Triple on crankarm without chainrings.
 


The Mountain Tamer Triple can be used to implement
a quad if triple chainring is 26T or larger.

Advantages:
  • eliminates cutting bosses
  • can run an aluminum chainring for triple
  • lower cost
See Support/F.A.Q. for information on the installation and use of the Mountain Tamer Triple. 

CHAINRINGS
 
Note:  The 16 tooth chainring is not
compatable with the Mountain Tamer Triple

Splined - 17 teeth  sold out

Splined - 18 teeth  sold out

Splined - 19 teeth  $15.95

Splined - 20 teeth  sold out

Splined - 21 teeth  $12.95

Splined - 22 teeth  $12.95    

Splined - 23 teeth  sold out

Splined - 24 teeth  $17.95    

Splined - 25 teeth  $17.95

Splined - 26 teeth  $11.95

Splined - 28 teeth  sold out

Splined - 30 teeth  $12.95 

Splined -  32 teeth    sold out

Splined - 34  teeth $12.95 ea.

Splined - 38 teeth    sold out 
______________________________________________________
Replacement Spacers/Retainer
Wave spring for Mountain Tamer Triple or Mountain Tamer Quad Plus  $2.50
Retainer for Mountain Tamer Triple or Mountain Tamer Quad Plus  $1.50
Note: the adapters come with a one retainer and one wave spring.

 




MOUNTAIN TAMER QUAD  PLUSTM  Details These are gone. There will not be any more.
This page remains for historical reference.
I have seen them show up on eBay.
 
Don't be limited by stock gearing
You can have LOWER GEARS 
Any way you want them for steep climbs

for high altitude

for easier climbing

for maximum efficiency

a necessity for loaded touring

great for hand cycles, trikes and recumbents
 
 

MOUNTAIN TAMER QUAD  PLUSTM   Replaces standard small chainring with 17 thru 34 teeth

Adds a 4th chainring with 16 thru 34 teeth

Works with oversize bottom bracket shells

Very easy to change sizes

Splined chainrings

Allows wide range of gearing

with optimal gear spacing



 



Having a 4th chainring is like low range on a 4-wheel drive vehicle.

You get a whole new set of gears below what you had before.

 
 



    Want even more?

    Using the Mountain Tamer Plus over the existing
     triple chainring you can have 5 chainrings.

    This setup is only recommended for a cycle with
     a long chainline, such as, a recumbent, trike or a tandem
     with the chainrings on the captain's crankset.

    The front derailleur may need to be modified.

     Very large chainrings can be used for the outer rings
     if the derailleurs are modified to accommodate them.
 

CHAINRINGS
Splined - 16 teeth  sold out

Splined - 17 teeth  sold out

Splined - 18 teeth  $16.95 1 left

Splined - 19 teeth  $15.95

Splined - 20 teeth  $15.95

Splined - 21 teeth  $11.95

Splined - 22 teeth  $12.95    

Splined - 23 teeth  sold out

Splined - 24 teeth  $15.95    

Splined - 25 teeth  $15.95

Splined - 26 teeth  $9.95

Splined - 28 teeth  $12.95 

Splined - 30 teeth  $12.95 

Splined -  32 teeth    sold out

Splined - 34  teeth $12.95 ea.

Splined - 38 teeth    sold out
_______________________________________________________

Replacement Spacer/Wave Spring/Retainer
Wave spring for Mountain Tamer Triple or Mountain Tamer Quad Plus  $2.50
Retainer for Mountain Tamer Triple or Mountain Tamer Quad Plus  $1.50
Note: the adapters come with a one retainer and one wave spring.

  

The wave spring applies the proper force to always ensure a tight fit of the chainrings  allowing for tolerance variation.

The retainer holds the chainrings securely and will not come off even in the most adverse conditions, yet can be easily removed with a small screwdriver or blade.


______________________________________________________________
 
Mountain Tamer made in U.S.A - Since 1987
___________________________________________________________________________________________

Shipping and handling is typically $7.50 for small orders, but may vary.

PayPal, money order, or check accepted.

No other addresses will be accepted.
How do I use PayPal?

International Orders
Minimum shipping for Prioirity Mail is usually over $35.
First Class Mail is an option for packages less that 14 ounces.
It runs around $19
To order:  email for prompt personal service
If you wish to speak in person, I will call you back upon request.

NTU ENTERPRISES, LLC
Albuquerque, NM 87123



____________________________________________________________________________________________

Return to Main Page
updated 1/24/2024