|
Don't be limited by stock gearing
You can have LOWER GEARS
Any way you want them
for steep climbs
for high altitude
for easier climbing
for maximum efficiency
a necessity for loaded touring
great for recumbents, trikes and hand cycles
|
MOUNTAIN TAMERTM TRIPLE $44.95 more info
Replaces standard small chainring
Allows from 17 thru 34 teeth in the triple position
Can be used as a quad if triple chainring is 26T or larger
Works with indexed front shifters including Rapid-Fire
when used as a triple
Works with oversize 88mm bottom bracket shells
Quick and easy to install
Very easy to change sizes
Splined chainrings
Works with 5 arm cranksets having a 74 mm bolt circle diameter
(includes wave spring and retainer)
|
|
MOUNTAIN TAMER QUADTM PLUS sold out
Replaces standard small chainring with 17 thru 34 teeth more info
Adds a 4th chainring with 16 thru 34 teeth
Works with oversize bottom bracket shells
Very easy to change sizes
Splined chainrings
Allows wide range of gearing with optimal gear spacing
Works with 5 arm cranksets having a 74 mm bolt circle diameter
(includes wave spring,spacer and retainer)
|
|
MOUNTAIN TAMER QUADTM sold out
- Adds a 16 thru 21 tooth chainring in the 4th position
- Used with standard triple chainring
- Very light weight - 59 grams with 16 T
- Allows wide range of gearing
- with optimal gear spacing
- Threaded chainrings
|
|
All Mountain TamerTM adapters work with cranks having
standard 74mm bolt circle (43.4mm hole spacing) 5 bolt pattern only.
They are not compatible with 4 arm cranks or cranks with 68mm BCD.
Check with Andel Enterprise Co. Ltd. http://www.andel.com.tw/ for 74mm BCD cranks.
or search on eBay. Use 'crank 74 110' or 'crank 74 130' as the search string.
CHAINRINGS
Splined - 16 teeth sold out
Splined - 17 teeth sold out
Splined - 18 teeth sold out
Splined - 19 teeth $15.95
Splined - 20 teeth sold out
Splined - 21 teeth $12.95
Splined - 22 teeth $12.95
Splined - 23 teeth sold out
Splined - 24 teeth $17.95
Splined - 25 teeth $17.95
Splined - 26 teeth $11.95
Splined - 28 teeth sold out
Splined - 30 teeth $12.95
Splined - 32 teeth sold out
Splined - 34 teeth $12.95 ea.
Splined - 38 teeth sold out
Threaded - 16-17 teeth 16T,17T sold out
Threaded - 18-21 teeth $8.95 ea. 20T sold out
110mm 34 teeth inner check for price
74mm 24, 26, 28, 30 teeth triple - inquire
any other standard chain rings - inquire
Also check the Bargin/Closeouts
for great deals on other chainrings |
|
Where to look for these sold out chainrings:
Note: The splined chainrings above are Suntour freewheel cogs. Suntour is out of business and the cogs are no being made. These cogs were used in the 'A' position on the following freewheels: Winner, New Winner, Winner Pro, Perfect, Ultra, Pro Compe. There may have been others. These are the ones I'm sure about.
The 'A' position is that of the two largest cogs on the freewheel.
I haven't found many sources for individual cogs, but there are several sites on the web selling freewheels.
Search on 'Suntour freewheel' to find them.
For some excellent photos and drawings of the freewheels see YellowJersey
The threaded chainrings are Normandy-Mailard or Sachs-Mailard cogs. They are the 'MR' or 'GY' position.
The only site I found was http://the-bici.com |
______________________________________________________
Replacement Spacers/Retainer
BD spacer for Mountain Tamer QuadPlus $2.00
Wave spring for Mountain Tamer Triple or Mountain Tamer Quad Plus $2.50
Retainer for Mountain Tamer Triple or Mountain Tamer Quad Plus $1.50
The wave spring applies the proper force to always ensure a tight fit of the chainrings allowing for tolerance variation.
The retainer holds the chainrings securely and will not come off even in the most adverse conditions, yet can be easily removed with a small screwdriver or blade.
Included with the adapters
|
|
______________________________________________________________
Bottom Bracket Cup Spacers $1.50 ea.
Allows fine adjustment of the chainline by shimming the BB cup away from the frame.
-
- ______________________________________________________________
Chainring Bolt Spacers $2.95 set of 5
Allows fine adjustment of the chainring by shimming the adapter away from the crank
or may be used to adjust the spacing of the middle or outer chainring.
-
- ______________________________________________________________
Metric Tap 8.0mm x .75mm $7.75 <>Used to tap the chainring bolt holes if you need to make them deeper.
______________________________________________________________
GORILLA BRAKE BEEFERS 19.95 ea. Special price $12.95 each or $19.95/pair
Brake posts flex causing loss of braking power, loss of modulation, and spongyness.
These really work! If you don't have these on your brakes, you need them!
for cantilevers
Want better brakes without the weight and expense of disc brakes?
Boost braking power!
Frames and brake post flex.
Stop spongy brakes.
Improves modulation
Used with linear pull brakes you can lock either wheel with your little finger.
A must for trialsin
for cantilevers - 50gm. black, red, blue or bare*
Required bolts, washers and spacers are included
Purple - sold out
Silver - sold out
* Bare is not anodized. These may be polished using a polish such as Simichrome to achieve a shiny finish or they may be painted or powder coated for a custom color. |
|
_________________________
GORILLA BRAKE BEEFERS $19.95 ea. Special price $15.95 each or $24.95/pair |
for U-brakes or roller cam brakes only 23gm.
bare*
all colors sold out
Required bolts, washers and spacers are included
If you have a U-brake, you really need these.
* The bare ones are not anodized. They may be painted or polished.
black, silver, purple, red and green - sold out |
|
GORILLA HEADLOCK 1" 1-1/8" 1-1/4" $19.95
Headset keep coming loose? Stop loose headsets forever.
Put it on and forget it!
For threaded headsets.
Also permits adjusting, maintance, etc. without needing a large wrench.
Great if your cyclo-touring.
Standard Special price $8.95
silver |
|
|
Ultralight Special price $12.95
silver, black, blue
1-1/8" purple - sold out |
|
|
______________________________________________________________________
Bargains/Closeouts
Great deals on parts that have been here too long.
______________________________________________________________________
Other New Components
Do you need a number of other parts, accessories or bike clothing and want a really good deal. Inquire .
Minimum order for this service is $100. Sorry, no Shimano or SRAM parts.
______________________________________________________________________
The Mountain Tamer and Gorilla products are no longer being manufactured.
The remaining inventory will be kept available as long as possible.
Mountain Tamer made in U.S.A - Since 1987
___________________________________________________________________________________________
Ordering Information
Sorry I don't have a shopping cart.
Most people have questions and I want to make sure you get answers.
To order: email for prompt personal service
If you wish to speak in person, I will call you back upon request.
Shipping and handling is usually $7.50 for small items, but may vary.
Priority Mail available. Request price information.
PayPal, money order, or check accepted
No other address will be accepted.
How do I use PayPal?
International Orders
Minimum shipping for Prioirity Mail is usually over $35.
First Class Mail is an option for packages less that 14 ounces.
It runs around $19
NTU ENTERPRISES, LLC
Albuquerque, NM 87123
____________________________________________________________________________________________
Last update 5/17/2024 |